TTS GLOBALTTS / SERVICE GUIDE
Factory Building Safety Audit: Fire, Electrical & Structural Risks
Plan a focused review of electrical, fire and structural safety.
Request a quote
01 / WHEN TO USE IT
Is the site ready for safe work?
- You are assessing a supplier’s industrial premises.
- Building layout, use or loading has changed.
- Electrical, fire or structural concerns need a documented review.
Understand the service in detail
A manufacturing site’s working environment includes the condition of its buildings and supporting systems. TTS’s original building-safety service brings electrical, fire and structural concerns into a defined assessment. The review uses available drawings, approvals, records and observations to identify questions requiring action or further professional evaluation. It is useful when qualifying premises, reviewing a changed layout or following up a site-safety concern. The exact engineering scope, local professional involvement and any specialist tests are confirmed for the project.
- 01Actual building use→
- 02Fire & access observations→
- 03Available building records→
- 04Specialist review needs
A scope guide; the actual methods and criteria are agreed for the project.
02 / A CLOSER LOOK
Separate visible findings from questions requiring engineering evidence.
Open a checkpoint to see the evidence recorded and how it informs your decision.
01Building use and changes
Compare available layout and use information with observed storage, mezzanines, extensions and production areas.
An undocumented change in use or loading may need review by a qualified local specialist.
02Fire and evacuation
Observe accessible escape routes, exit obstruction, signs and the agreed fire-safety arrangements and maintenance records.
Photographs and locations should make each issue actionable; a general “fire safety checked” statement is not enough.
03Electrical conditions
Record accessible visible concerns, identification and maintenance evidence within the agreed non-invasive scope.
A visual review does not establish electrical test results or permit unsafe access to energised equipment.
04Structural concerns and escalation
Record visible cracks, corrosion, deformation or other agreed indicators with location and context.
Do not infer structural capacity from photographs. Identify drawings, calculations or specialist investigations needed to resolve the concern.
ILLUSTRATIVE EXAMPLE
A new storage area changes the evidence required.
- !
The situation
A new mezzanine changes the building’s use.
- ◎
What to record
Compare site observations with available plans and loading records.
- ↗
The next decision
Refer unresolved structural questions to qualified specialists.
Read the full scenario
Illustrative example: heavy stock is stored on a mezzanine that is absent from the available layout. Record the location, observed use and missing documents. The next step is to obtain the relevant design/load information and qualified review. A walkthrough report should not label the structure safe simply because no obvious damage was visible during the visit.
03 / STANDARDS & REQUIREMENTS
The rule.
The scope.
The evidence.
Applicability and editions are confirmed for your product, market and project date.
Applicable local building, fire & electrical requirements
The site jurisdiction and building use determine the relevant rules. Agree which documents and qualified disciplines are required.
Official source & scopeISO 45001 / occupational health and safety
A management-system context for workplace risks; it does not replace structural design codes, engineering calculations or statutory approvals.
Official source & scope04 / THE WORKING PROCESS
From your brief
to your next step.
01Prepare the brief
Define the premises, assessment concerns and local professional requirements.
02Start the work
Review available plans, approvals, previous findings and access arrangements.
03Examine & record
Visit the agreed areas and document observed electrical, fire and structural concerns.
04Review & follow up
Report the observations and identify items requiring specialist assessment or corrective action.
Content guide; the agreed service determines the final deliverable.
05 / YOUR DELIVERABLE
A basis for
your next decision.
Recorded site observations and issues requiring further assessment or action.
How to use the result
The findings support a prioritised follow-up plan for the premises. A visual assessment should not be treated as a structural design calculation, a statutory approval or confirmation that concealed conditions are safe. Identify the further professional work required for any unresolved concern.
06 / Discuss your project
What to send for a quotation
- Site location, building use, age and relevant layout or structural drawings.
- Existing approvals, safety records and previous assessment reports.
- Details of modifications, loading changes and known concerns.
Practical questions
Is this a structural safety certificate?
The agreed audit documents observations and evidence gaps. Structural certification, calculations or statutory approval require the relevant qualified scope and responsible parties to be confirmed separately.
Are all engineering tests included?
No. State any desired tests and known risks. The equipment, access, local professionals and engineering methods are scoped separately.